Finished welded the frame on the 3 window.

I got the engine, rear axle, and front axle back out of the car. Then I finished welding up the rest of the frame that was blocked by those parts. Once that was done I got the frame removed out of the frame rack.

Finished mounting the front and rear axles in the 3 window.

I got all the brackets attached, the rear cross-member made, and both of the axles are finished.

Working on the rear axle in the 3 window.

I got the rear cross-member back in the frame. With that in place I was able to get the rear axle back in the frame as well. Were using 36' radius rods for the rear axle, and I'm heavily modifying them to fit our application. Next I'll work on the connection at the front of the radius rods near the transmission.

Getting the engine back in on the 3 window.

I made some new engine mounts, and got the engine back in the car. Now I can work on the transmission mounts.

Got the center x-member boxing plates installed next to where the transmission will go on the 3 window.

I had plate cut to box the sides of the x-member. I'l use this area for the transmission mounts.

Getting the rear boxing plates installed on the 3 window.

I've been working on installing the rear boxing plates on the 3 window.